any Connector any Edge - What's Included
Contents of this Article...
- Connector Materials
- UCS
- Dado Attributes
- Edge Connector Attributes
- Edge Numbers
| Connector Material Name | Connector Material Description (Edit connector operations to suit your needs) |
|---|---|
| 8mm Dowel |
32mm x 8mm dowel (8mm Bore) |
| Back Screw | 50mm 8 gauge screw at right angle to connection (3mm Bore) |
| Cabinet Screw |
50mm 8 gauge screw (3mm Bore) |
| Cabineo |
Cabineo connector drilled conventionally (3 x 15mm bore, 5mm post bore) |
| Cabineo Flush |
Cabineo connector including shaped route so connector sits flush |
| Cabineo Flush Cap |
Cabineo connector including shaped route so both connector and cap sit flush |
| Clamex P14 |
Clamex P14 connector (Standard CABINET VISION operations) |
| Confirmat Screw 8mm | 8mm Confirmat Screw (8mm through bore, 5mm pilot bore) |
| Divario P18 |
Divario P18 connector (Standard CABINET VISION operations) |
| Hafele Arret Bench Clip |
Hafele Arret Bench Clip (10mm Bore) |
| Ixconnect Tab 15 (16-Screw) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore) |
| Ixconnect Tab 15 (18-Screw) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore) |
| Ixconnect Tab 15 Flush (16-Screw) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore, Shaped Flush Route) |
| Ixconnect Tab 15 Flush (18-Screw) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore, Shaped Flush Route) |
| Ixconnect Tab 15 (16-3mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 3mm Post Bore) |
| Ixconnect Tab 15 (18-3mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 3mm Post Bore) |
| Ixconnect Tab 15 Flush (16-3mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 3mm Post Bore, Shaped Flush Route) |
| Ixconnect Tab 15 Flush (18-3mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 3mm Post Bore, Shaped Flush Route) |
| Ixconnect Tab 15 (16-5mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore) |
| Ixconnect Tab 15 (18-5mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore) |
| Ixconnect Tab 15 Flush (16-5mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore, Shaped Flush Route) |
| Ixconnect Tab 15 Flush (18-5mm Plug) |
Hafele Ixconnect Tab 15 Cam (15mm Cam Bore, 5mm Post Bore, Shaped Flush Route) |
| Keku Push (Frame) |
Keku Clip Set (5mm Bore at 32mm centers) |
| Keku Suspension (Frame) |
Keku Clip Set (5mm Bore at 32mm centers) |
| Knapp Connector 5061 |
Knapp Connector 5061 |
| Knapp Connector 5062 |
Knapp Connector 5062 |
| Knapp Connector 5063 |
Knapp Connector 5063 |
| Minifix 15 Cam (34mm Bolt) |
Hafele Minifix Cam with 34mm Bolt (15mm Cam Bore, 8mm Bolt Bore, 5mm Pilot Bore) |
| Outrigger Cam |
Hafele Rafix Cam with extra bore |
| Peanut 1 | Intelligent Fixings PEANUT® for nesting (Peanut Route with ramp plus 5mm and 25mm Cam Bore) |
| Peanut 2 | Intelligent Fixings PEANUT® (Peanut Route with ramp plus 6mm Post Bore) |
| Rafix 20 |
Hafele Rafix Cam (20mm Cam Bore, 5mm Post Bore) |
| System 32 Bracket |
Hafele System 32 Bracket (5mm Bore at 32mm Centers) |
| UCS included in this package | Description |
|---|---|
| Joinery IT (Asm-1 | Edge Connectors-1) |
(1 of 4) Multiple Parts - Add Dado Connections |
| Joinery IT (Asm-1 | Edge Connectors-2) | (2 of 4) Multiple Parts - Add Attributes and Edge Connectors |
| Joinery IT (Asm-1 | Edge Connectors-3) |
(3 of 4) S_HDWCON|*DADO - Remove System Connectors |
| Joinery IT (Asm-1 | Edge Connectors-4) |
(4 of 4) Multiple Parts - Add Edge Numbers |
| cvappstore (Asm-2 | Connectors-1) |
(1 of 4) Drawer and Assembly Parts - Option on Part to Flip Hardware Connectors |
| cvappstore (Asm-2 | Connectors-2) |
(2 of 4) S_HDWCON - Connector Hardware Z position move for Dado DZ |
| cvappstore (Asm-2 | Connectors-3) |
(3 of 4) ****BORE|HOLE|L*VBORE|*DADO - Global Operations for Sub-Assemblies |
| cvappstore (Asm-2 | Connectors-4) | (4 of 4) OP|*DADO - Add ability to flip system Dado |
![any Connector any Edge.cvj [Assembly] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/251/original/302fe2cd-ada4-4f3c-8782-87f37e3a9cc2.png)
| Dado Attributes | Description |
|---|---|
| Dados (Edit) | Activate all dado attributes |
| Dados (Match Edge Length) | Use this when Dado DY does not follow edge length (When manually changing size in orthographic view or editing part shape) |
| Dados Edge n (Type) - System | No change is made to Edge n (Note: Any dado present on this edge is from the assembly construction) |
| Dados Edge n (Type) - None |
Removes System Dado if present (Does not reduce part size) |
| Dados Edge n (Type) - Blind Dado |
Adds Blind Dado Connection to Edge n (Part size increases accordingly) |
| Dados Edge n (Type) - Qualified Blind Dado |
Adds Qualified Blind Dado Connection to Edge n (Part size increases accordingly) |
| Dados Edge n (Type) - Stopped Dado |
Adds Stopped Dado Connection to Edge n (Part size increases accordingly) |
| Dados Edge n (Type) - Through Dado |
Adds Through Dado Connection to Edge n (Part size increases accordingly) |
| Edge Dados (Flip Face) | Flip all Dados on the part |
| Dados Edge n (Reverse Direction) | Reverse direction of the Dado Type selected for Edge n |
![any Connector any Edge.cvj [Assembly] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/253/original/8516cf96-1a40-4860-a96c-2ddce386efd7.png)
![any Connector any Edge.cvj [Assembly] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/255/original/48be12fc-5c8b-40fb-83be-55cc697ab381.png)
![any Connector any Edge.cvj [Assembly] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/257/original/ae4a7a8e-2ff4-4305-acfe-b258a20ff3b9.png)
| Edge Connectors Attributes | Description |
|---|---|
| 1) Connectors (Edit) - True / False | Activate Edge Connectors attributes |
| 1) Edge (Show Numbers) - True / False | Use this to display corresponding edge numbers on the part in 3D and Orthographic views |
| 1) Edge Connections (Flip Face) - True / False | Flip System Connectors |
| 2) Connectors Edge n - Default | No change is made to Edge n (Note: Any connectors present on this edge are from the assembly construction's Edge Connection) |
|
2) Connectors Edge n - Add |
Add Connectors to Edge n (In addition to any system connectors present) |
|
2) Connectors Edge n - Delete |
Remove System Connectors from Edge n if present |
|
2) Connectors Edge n - Replace |
Remove System Connectors from Edge n if present and add Connectors using attributes |
|
3) Connectors Edge n (Flip Face) - Face / Back |
Flip connectors on Edge n between 'Face' and 'Back' of the part |
|
3) Connectors Edge n (Flip) - True / False |
Flip Hardware Connector on the workplane ( ___| --> _| ) |
|
3) Connectors Edge n (Pos First) |
Set position of first connector on Edge n |
|
3) Connectors Edge n (Pos Last) |
Set position of last connector on Edge n |
|
3) Connectors Edge n (Qty) |
Number of connectors on Edge n |
|
3) Connectors Edge n (Slide AZ) |
Direction of Peanut connector if selected |
|
3) Connectors Edge n (Type) - <lst> |
The list you set up in the USC provide your custom connector options |
|
3) Connectors Edge n (X) |
Adjust connector X position if needed (Back Screw) |
| 3) Connectors Edge n (Z) | Adjust Connector Z position if needed |
![any Connector any Edge.cvj [Assembly] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/259/original/c1bc5dbc-7526-4cd1-be33-fde939fd7d05.png)
Happy Connecting - Email [email protected] with any feedback...