Cinetto PS23 Bi-Fold Door Basics - User Guide

Contents of this Article

  • Sectioning Bi-fold Door and Selecting the Cinetto Hinge
  • Door Attributes
  • Add Lower Guide to Door
  • Add Opener (Pull to Open)
  • Add Opener (Push to Open)

Sectioning Bifold Door and Selecting the Cinetto Hinge

In this example we section an Upper cabinet into 2 doors.

  1. Split Face Section vertically
  2. Click handle so both doors are left (or both right)
  3. Double click bi-fold door for door properties > Hinges
  4. Change Hinge
  5. Navigate to Cinetto group: Hinge > Fit > Cinetto Bifold Basics
  6. Select desired hinge
  7. 25kg Cinetto set with Centre Bifold hinge selected in this example...
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION

Door Attributes

  1. Left Click 'DOR' object
  2. Cinetto Attributes:
  3. Lower Guide (No/Yes)
  4. Opening Kit (No/Pull to Open/Push to Open)
  5. Upper Rail (Silver/Black)
  6. Pull Attribute:
  7. Left/Right Reference (Center/Default/Hinge Side)
  8. Section View > Door Properties > Pulls > Set main door Pull Quantity to zero
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION

Add Lower Guide and Options

Cinetto (Lower Guide) = Yes

  • Cinetto (Lower Guide Y Adjust)
  • Enter a value here to align the hardware with bottom, deck or shelf
Untitled [Assembly] - CABINET VISION

NOTE: It is not recommended to use Lower Guide with Door Self Openers

INFORMATION: Adding a shelf is used as a locating option for the 'Opener Magnetic Catch'

Untitled [Assembly] - CABINET VISION

Add Opener (Pull to Open) and Options

Cinetto (Opening Kit) = Pull to Open

  • Cinetto (Magnet Catch Position)
  • Select Above Bottom or Below Shelf
  • Sample 3D with catch positioned below shelf
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION

Add Opener (Push to Open) and Options

Cinetto (Opening Kit) = Push to Open

  • Cinetto (Carcase Hinges): USE UNSPRUNG HINGES
  • Cinetto (Magnet Catch Position)
  • Select Above Bottom or Below Shelf
  • Sample 3D with catch positioned below shelf
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION