Job or Room Properties (Recommended)

• Drawer Construction (Blum Antaro System)
• Roll Out Construction (Blum Antaro-System)
• Drawer Material (Blum Antaro)
• Roll Out Material (Blum Antaro)
• Drawer Guides (Blum Antaro 30kg)

Cabinet Properties

• Drawer Construction
  • Use Sink Drawer Blum Antaro (Ds) at cabinet level when building a sink drawer cabinet
  • Use Corner Drawer Blum Antaro (Dcs) at cabinet level when building space corner drawers
  • Limit drawer heights EG: Blum Antaro (B), Blum Antaro (C), Blum Antaro (M) etc
  • Add Design Element by selecting Blum Antaro (De)
• Roll Out Construction
  • Select specific inner drawers by switching Roll Out constructions
• Drawer Guides
  • Use Blum Antaro 65kg  on larger drawers as desired

Section Properties

• Drawer Construction - Change individual drawer constructions to control each drawer
• Roll Out Construction - Change individual inner drawer constructions to control each drawer

Double Gallery Rail - Assembly Level > Orthographic View

1. Left Click Drawer or Roll Out Back
2. Toggle 'Double Gallery Rail Drawer' to True
3. An extra Rail Set is added to the hardware list and reports

Custom Drawer Height - Assembly Level > Orthographic View

1. Left Click Drawer or Roll Out Back
2. Use 'Drawer Box Height (Max size)' attribute from the side bar for suitable drawer heights (We're using 64mm increments)
3. I've selected 327.5mm (Note: An extra rail set is added to the drawer automatically)
4. Finally I select 2 for the Rail Set (Qty)
5. Now I have two extra rail sets added to the drawer complete with brackets

Space Tower - Start with an empty cabinet...

1. Section Face > Drawer
2. Section Interior > Horizontal Split
3. Place the desired number of Roll Outs
4. Move to an orthographic view > Left Click Roll Out Back > Connect Roll Out to Front
5. 3D View after connecting Roll Out 1 & Roll Out 3 to the front - I set Roll Out 2 & Roll Out 4 to be M height and left them as internal drawers
6. Cut List
7. Right Click > Save As > Make sure to preserve the Attributes when saving the Space Tower to your library

Space Corner - Start with a cabinet from the Joinery IT Library > Base > Corner 90 Cabinets > Choose your preferred shape

1. Space Corner-Joinery IT
2. Blum Space Corner
3. Cabinet level > Section View > Properties > Construction - Select Drawer Construction 'Blum Antaro (Dcs)'
4. Section Face into the number of Drawers desired (Yes, you can delete all drawers and add fresh ones back in the section editor)
5. Right Click > Save As - Save cabinet back to you own library
6. WYSIWYG - Get "What you see is what you get" visual validation
7. Drawers are reported

Sink Drawers

1. Cabinet level > Section View > Properties > Construction - Select Drawer Construction 'Blum Antaro (Ds)'
2. Section Face into the number of Drawers desired
3. Control side widths from the side bar using Cabinet Level Attribute
4. Sink drawers are in the hardware list

Blum Drawer Press

1. Add System Parameter to activate extra boring - You can add into System Parameters or use our setup package which is included on the website to download/install seperately
2. Look at the result in 3D

Material Parameters for Bottom Bore Sizes

Solid Ultimate - You can edit the bottom boring sizes in the Model Editor directly

Solid Advanced - Use material parameters to control the bottom bore sizes

• Right Click > Edit each guide material > Parameters