Panels and Fast Upper Positions - User Guide
Contents of this Article...
Fast Upper Positions (UCS applies to Upper Class Objects only)
- Assembly Attributes for fast positioning
- Fast Position Bottom
- Fast Position Top
Panels
- System Parameters
- Automatic Door Panels (Explained)
- Filler Width
- Door Part versus Case Part
- Left Facing, Right Facing
- Base Panel Attributes
- Upper Panel Attributes
- Tall Panel Attributes
- Vanity Panel Attributes
- Toe Type Choices
- Soffit Type Choices
- Panel (Face) - Examples (Milan Door from Dezignatek)
- Scribing Example
- Room Notes
- Activation
- Size in Layout
- Size in S2M
- Part Comment on Labels
- Visible Scribing (added in CV version 2025.1)
Fast Upper Positions - Object Attributes for fast positioning your 'Upper' Assemblies and Fillers.
Fast Position Bottom
- Custom (Y) - Enter your custom value (any position below the current top position is valid)
- Default - Last active position
- On Counter Top - Positions bottom of assembly on the Counter Top Surface
- On Floor - Positions bottom of the assembly on the Floor
- On Soffit - Positions bottom of the assembly on the Soffit
- On Vertical Positional - Positions bottom of the assembly on the Vertical Positional (using Room Layout value)
- Reset Default - Returns bottom of the assembly to the default position for an Upper Assembly
![Untitled [Layout] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/186/original/2773941f-14d3-4187-b61e-6a46327e0336.png)
Fast Position Top
- Custom (Y) - Enter your custom value (any position above the current bottom position is valid)
- Default - Last active position
- Reset Default - Returns top of the assembly to the default position for an Upper Assembly
- Under Ceiling - Positions top of assembly under the Ceiling
- Under Counter Top - Positions top of assembly under the Counter Top Surface
- Under Soffit - Positions top of the assembly under the Soffit
- Under Uppers - Positions top of the assembly under the default Upper Assembly position
- Under Vertical Positional - Positions top of the assembly under the Vertical Positional (using Room Layout value)
![Untitled [Layout] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/478/188/original/60334a28-1b9a-4ee0-bbde-11af71496371.png)
Panels - System Parameters
- DP_FDX = Panel (Filler Width)
- DP_CEILING = Panel Scribing (Ceiling)
- DP_FLOOR = Panel Scribing (Floor)
- DP_WALL = Panel Scribing (Wall)
Panels - Automatic Door Panels (Explained)
It is popular for Designers/Drafters to add End Panels as a separate object. We have added Base, Upper, Tall and Vanity 'End Panels' with basically three options.
- Left Facing Door
- Right Facing Door
- Panel Part (Case part)
In general the parts within the object should automatically face and size as required. Side bar attributes are there as a way of overriding the automated decisions when desired.
Tip: End Panels automatically resize/rename as a Filler (on edge) in the following situations...
- End Panel is between two cabinets
- End Panel is between one cabinet and the wall end


Panels - Base Panel Attributes
- Depth (Adjust) - Panel extends forward of the case by this measurement
- Panel (Face) - Automatic, Left, Right (choices)
- Panel (Type) - Door Part (Default), Case Part (choices)
- Toe Type - Separate Toe, Notched Toe, Full End to Floor (choices)
Panels - Upper Panel Attributes
- Depth (Adjust) - Panel extends forward of the case by this measurement
- Panel (Face) - Automatic, Left, Right (choices)
- Panel (Type) - Door Part (Default), Case Part (choices)
- Panel Position (Up/Down) - Default, On Bench, Reset Under Soffit, Under Uppers, Under Uppers and On Bench (choices)
- Soffit Type - Separate Bulkhead, Full End to Ceiling (choices)
Panels - Tall Panel Attributes
- Depth (Adjust) - Panel extends forward of the case by this measurement
- Panel (Face) - Automatic, Left, Right (choices)
- Panel (Type) - Door Part (Default), Case Part (choices)
- Soffit Type - Separate Bulkhead, Full End to Ceiling (choices)
- Toe Type - Separate Toe, Notched Toe, Full End to Floor (choices)
Panels - Vanity Panel Attributes
- Depth (Adjust) - Panel extends forward of the case by this measurement
- Panel (Face) - Automatic, Left, Right (choices)
- Panel (Type) - Door Part (Default), Case Part (choices)
- Toe Type - Separate Toe, Notched Toe, Full End to Floor (choices)
Panels - Toe Type Choices
- Separate Toe
- Notched Toe
- Full End to Floor


Panels - Soffit Type Choices (3 & 4 are examples of Soffit Type choices)
- L Shaped Filler (Automatic when place between cabinet and wall end)
- Cabinet
- Separate Bulkhead
- Full End to Ceiling

Panels - Panel (Face) examples
Milan Door from Dezignatek (pictured)
- Right facing door (Filler width)
- Cabinet
- Right facing door
- Left facing door
Panels - Scribing examples
- Room Notes (Set your scribing measurements for the room)
- Activation (Notched Toe, Full End to Floor, Touching Wall and Not Banded on back edge, Full End to Ceiling)
- Size in Layout
- Size in S2M
- Part Comment on Labels





Panels - Visible Scribing (added in CV version 2025.1)
- UCS Variable allows viewing in Layout Views
- Scribing is always visible in Assembly Views
- Parts with 'Exposed' material in each object have scribing added while parts with 'Standard' material do not
![The Panel Job.cvj [Layout] - CABINET VISION](https://media.screensteps.com/image_assets/assets/009/473/714/original/b205f736-8f6c-4d94-bc40-09190b52a07c.png)