2-Piece MDF Shaker Frame & Panel Door - Post Import

IMPORTANT: This package was created in CABINET VISION Version 2025.2 and will not work in any earlier versions.

PLEASE FOLLOW ALL POST IMPORT STEPS CAREFULLY AND IN SEQUENCE, PERFORMING SUGGESTED TESTING BEFORE CUSTOMISATION OF THE PACKAGE TO SUIT YOUR INDIVIDUAL NEEDS.

Contents of this Article...

  • How the door was created
  • Update/overwrite CV App Store part library
  • Collect System Tool ID for each Tool Set provided
  • UCS 1 - Integrator Variables
  • S2M Preferences > CNC > Unchecked "Allow Invalid Pre-Assigned Tools to be Substituted"
  • Test the package now! (Before customising any Tool Sets)
  • Customising Tool Sets
    • Substitute provided tools with tools already integrated on your CNC
    • Do not replace the "No Cut" tool

The door is created as a multi piece door which allows door sectioning:

  • Our UCS adds a "Routed" (1-piece), or "2-piece" option to each of the 'Panel Types'
  • The UCS hides frame parts, adds a slab (one piece frame) and adds routes to the slab for each panel
  • The UCS also passes conventional drawer guide, hinge and pull operations through to the slab

Update/overwrite CV App Store part library

  • This ensures proper route visibility
  1. Open CVC-CV App Store-2025.2.3533_05 package (or later) in the Setup Package utility and set 'All Matches' to Overwrite
  2. Import Package
CABINET VISION

Collect System Tool ID for each Tool Set Provided

  • Open Tool Manager
  • Review and note down the "Tool ID" for each Tool Set listed here:
    • Outside Edge R3 TS
    • 2pce Panel 45 TS
    • 2pce Raised Panel TS
    • 2pce H Slat TS
    • 2pce V Slat TS
    • Route Flat 45 TS
    • Route Raised 45 TS
    • Route H Slat 45 TS
    • Route V Slat 45 TS
    • Route Glass 45 TS
CABINET VISION

UCS 1 - Integrator Variables

  1. Left Click "Code" for UCS 1
  2. Enter 'System Tool ID' values into the UCS where indicated.
CABINET VISION

S2M Preferences...

S2M Preferences > CNC > Unchecked "Allow Invalid Pre-Assigned Tools to be Substituted"

1 Pece and 2 Piece Door.cvj [Layout] - CABINET VISION

Start a Job and test the package now!

Before customising Tools within each Tool Set, we recommend testing the Shaker Door in a job, using materials and tools provided.

  • Ensuring each panel type that you intend to customise is visually OK, will help you when refining your own tools' offset and depth values.

Customising Tool Sets...

Edit one Tool Set at a time:

  1. With Tool Set selected > Edit Shape
  2. Replace V-Bit and Flat Routers with your existing tools
  3. Do not replace the "No Cut" tool - The operation is there for visual purposes only - We do not want this operation to be performed on the CNC
CABINET VISION
CABINET VISION