Need 25mm Adjustable Shelves? Modify a Schedule for the Room or Job

Contents of this Article...

  • Example: Change Adjustable Shelf to use 25mm material using Modify for this Job
  • In one assembly we select the Original Schedule

In this Example we Modify the Standard Base Material Schedule selecting 25mm White material...

  1. Open Job Properties > Cabinet Materials > Base Standard Material Schedule > Modify for this Job
  2. Expand Panel Stock > Locate desired 25mm material > Left Click/Drag to the Drawer Pull position in the Left Pane
  3. Return and accept changes
  4. The Standard Base Material Schedule Name is Edited for your reference later on
  5. Success - All adjustable shelves in standard base cabinets are assigned 25mm material
Untitled [Layout] - CABINET VISION
Untitled [Layout] - CABINET VISION
Untitled [Layout] - CABINET VISION
Untitled [Layout] - CABINET VISION
Untitled [Assembly] - CABINET VISION

Let's use the Original Material Schedule in a cabinet

  1. Edit base assembly > Section > Properties > Material
  2. Select desired schedule (In this example it is the original 'unmodified' schedule)
  3. Click OK
  4. 16mm material assigned to the Adjustable Shelf in this assembly
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION
Untitled [Assembly] - CABINET VISION

The Original Schedule can also be selected by Room

Give it a try - This is a much faster way to switch out material for Adjustable Shelves

And as a last resort...
For individual shelves you can right click in the orthographic view and change material properties there.