a) Add a sink

• Plan view > Catalogs > Your Cabinet Library > Appliances > Left click on Square Basin

b)  Drag and bounce the sink off the wall which the sink is to be placed - this will arrange the sink to correct front to back in the plan

c)  Drag the sink back to the front of the sink unit > Ctrl + left click to drop into the position.

• Left click the sink unit to identify center position

d)  Left click the sink and adjust the center position to match the sink unit

e)  Left click the sink and set the outset for the sink to 60mm or distance required for sink from wall

a) Add a hob

• Plan > Catalogs > Appliance > Cooktops > Radiant Cooktops > make your selection for this job (RC-1)

b) Left click and drag and drop as with the sink by bouncing on the wall behind where it is to be positioned and then Ctrl + left click to drop in front of the underbench oven unit

• Select the underbench oven unit and discover its center position

c)  Alter the center position of the hob to align with the under bench unit and give it an outset to suit the manufacturers specifications for the hob